Bounty Hunter Camo-LS Owner's Manual download pdf (Page 7)

TURN THE DETECTOR ON

Click the left knob to the on position.

The detector automatically enters the DISCRIMINATION Mode.

PINPOINT Mode

To operate in this mode:

• Turn the right knob, Disc/Notch, 100% counterclockwise, to the off

position.

• Press the DISC button.

• Reduce the Sensitivity Control to the 2:00 or 3:00 position.

• Sweep the coil over the surface of the ground.

The detector will emit one of three tones, depending on the type of metal

detected.

The top display will indicate the type of metal targeted.

The bottom display will indicate the depth, in inches, of coin-sized objects.

A worthwhile target is evidenced by a consistent tone, and a repeatable

target and depth indication as you sweep back and forth over the same spot

on the ground. Non-repeatable tones indicate the presence of trash objects

or highly oxidized metals.

You can increase the level of sensitivity, depending on the ground

conditions. If the detector emits false signals, simply reduce the Sensitivity

until the false signals cease. The detector will work well with the Sensitivity

in the 2:00 or 3:00 position, but higher Sensitivity settings will increase depth

detection.

DISCRIMINATION Mode

To operate in this mode:

• Press the DISC button.

• Reduce the Sensitivity Control

to the 2:00 or 3:00 position.

• Sweep the coil over the

surface of the ground.

• Turn the right knob,

Disc/Notch, to eliminate

unwanted items from

detection as illustrated to the

right:

BASIC OPERATION

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Bounty Hunter Camo-LS Owner's Manual Page 7