Bounty Hunter Land Ranger Owner's Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
25
False signals and chatter
The biggest frustrations you will encounter when using a metal detector
are false signals and chatter. The Land Ranger is a very sensitive,
deep-seeking detector. It will respond loudly to many targets for which
other detectors might only emit a weak signal. As a result, the detector
may emit false, trash-induced signals that seem confusing. Electrical
interference, or large, irregular trash objects can also cause false
signaling. With practice using your Land Ranger in the field, you will
learn to recognize the broken, non-repeatable tones that characterize
the false signal.
Tips for dealing with false signaling
Dig only those targets that emit a strong, repeatable signal as
you move the search coil over the same spot on the ground. Most
good objects will respond with a consistent, repeatable signal. If a
signal does not repeat after sweeping the coil directly over the
suspected target a few times, it is more than likely trash metal.
Metal Detectors emit magnetic fields which can interfere with one
another. If you are detecting with another person who has a
detector, you could have interference between the detectors;
always keep two detectors at least 20 feet apart. Also, avoid
searching under electrical power lines.
As you sweep the search coil back and forth over the ground,
learn to recognize the difference between the signals that occur at
random and signals that are stable and repeatable.
When searching very trashy ground, it is best to scan small areas
with slow, short, overlapping sweeps.
To prevent erratic signals and difficult pinpointing in trashy
areas, set your detector to rejects all trash metals (i.e., reject all
metals in the GOLD RANGE) or consider purchasing the Bounty
Hunter 4 Gold Nugget Coil System.
Chatter
Electromagnet fields occur naturally or can be man-made. Indoors,
household appliances, particularly TVs and lights, emit electromagnetic
energy. Outdoors, power lines, either overhead or buried, create
significant interference and the earth also emits electromagnetic
energy. The detectors coil creates a magnetic field. The detector
senses other electromagnetic fields and can sometimes chatter or
beep erratically. If this happens, reduce the detectors sensitivity.
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Comments to this Manuals

No comments