Bounty Hunter QSIGWP Owner's Manual download pdf (Page 11)

●

4 REJECTED TARGET

When “X” appears under a target

category, objects falling into this

category are eliminated from

detection. This feature is commonly

referred to as target discrimination.

With each press of the REJECT

TARGET touch ad, you will

progressively eliminate, from left to

right, the common, less desirable, targets. When all three “X” are

illuminated, the next press will erase all “X”s, returning the detector to

all-metal detection status, where all types of metals will be detected.

OPERATING CONTROLS

The Quick Silver is the most automated, easy-to-operate, professional

metal detector ever designed. It is designed for those who are new to the

hobby providing maximum basic target discrimination, while requiring

minimal operator adjustment.

DEPTH SELECT

With each press of the DEPTH SELECT

touch pad, the detector toggles among

three different depth-detection levels.

Each of these sensitivity levels is

identified through the 3-segment depth-

select icon on the right of the display.

When three segments are illuminated,

the detector is at maximum sensitivity. As you press the DEPTH SELECT

touch pad, the detector toggles among the three different sensitivity levels.

A more detailed explanation of depth selection is found on page 14.

TARGET REJECT

Upon power-up, all types of metals are

detected. The TARGET REJECT touch

pas allows the user to eliminate

undesirable metals from detection.

With each press of the REJECT TARGET

touch pad, unwanted metals are

progressively eliminated, from left to right on the display. When all three

“X”s are illuminated, the next press will erase all “X”s, returning the detector

to all-metal detection status, where all types of metals will be detected.

BASIC OPERATION

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

Bounty Hunter QSIGWP Owner's Manual Page 11