10
LCD TARGET DISPLAY
-Motion modes only
READING THE DISPLAY
The LCD Target Display is accurate
in the Motion Modes only.
The Liquid Crystal Display (LCD)
shows the PROBABLE identification
of the targeted metal.
Pass the search coil repeatedly over a
target, and observe the target
readout. The detector will register a
repeating, unchanging target
identification when a buried target
has been located and identified. If,
upon repeated passes over the same
spot, the target identification reads
inconsistently, the target is probably a
trash item, or oxidized metal. With
practice, you will learn to unearth
only the repeatable signals.
The segment identifications are
highly accurate, when detecting the
objects described on the label. For
example, if you pass the coil
repeatedly over a nickel, your
detector will repeatedly register a
nickel. However, if you repeatedly
register a nickel, for an unknown
buried object, you could be detecting
some other metallic object with the
same magnetic signature as a nickel.
GOLD TARGETS Gold objects will
register on the left side of the LCD
scale.
Gold flakes will register under
Iron/Foil
Small gold items will register under
Pull Tab.
Medium-sized gold items will
register under S-caps.
Large gold items will register as
Zinc 1¢.
SILVER TARGETS: Silver objects
will register to the right of the scale,
under 25¢, 50¢, or $1, depending
on the size of the object. The larger
the object, the farther to the right it
will register.
IRON/FOIL: All but very large iron
and aluminum objects will register
on the far-left side of the scale. This
could indicate a worthless item
such as a nail, or a more valuable
historic iron relic.
PULL TAB: Most older pull tabs
from beverage cans will register
here. Many gold rings will also
register here.
5¢: Nickels and many newer pull
tabs register here.
S-CAPS: Older screw caps from
glass bottles will register here. Large
gold rings, like a class ring, could
also register here. Some non-U.S.
coins of recent vintage will also
register here.
1¢ ZINC: Newer pennies (post-
Comments to this Manuals